Nowadays, we know more or less about the LCD backlight, as an indispensable part of many LCD screens, many devices need to customize the backlight where the screen is used. Today summed up the five parameters that need to be provided when customizing the LCD backlight, hoping to help you a little.

1. First of all, the customer needs to provide the size of the LCD backlight, including length, width and thickness, because the thickness will affect the choice of lamp and lamp board, so this parameter must be provided.

2. Need to provide the color of LED lights, because it will work in different places, there are certain requirements for the color of LED lights, the more common colors are white, red, blue and so on. Of course, if there are different requirements for the brightness of the LCD backlight, it may affect the number of lights, so be sure to explain if there are special requirements.

3. A very important parameter is the conductive connection of the LCD backlight, which needs to be provided by the customer according to the use of their own products, usually FPC connection, PCB pin connection, lead connection or pin connection to conduct electricity, of course, the most used or pin connection.

4. Secondly, the customer needs to provide voltage, the effect is different under different voltages, or bright or dark, in order to not let the LCD backlight burn or the effect is too poor during the detection, the voltage parameter still needs to be provided.

5, the last parameter is the shape, the most common is the rectangular LCD backlight, but there are some more strange shape, relatively speaking, strange shape of the backlight is more difficult to do, it needs to use the diaphragm will be more difficult to do, so if the customer wants to order, or to ask in advance whether you can do a unique shape of the LCD backlight.